SKU BV-OBDII

BlackVue OBD-II Power Cable

Availability:

in stock, ready to be shipped

Save 15%

$25.99

$25.99 - $25.99

$25.99

$21.99

$21.99 - $21.99

$21.99

Early Black Friday Sale

Quantity

Disclaimer

Supports most vehicles manufactured since 2010
Not compatible with non-standard OBD II ports, such as found in some Tesla models
May not be compatible with some non-Tesla vehicles, including some Ford and Lincoln models

Overview

The easiest way to use Parking Mode

In terms of functionality, the OBD-II cable essentially achieves the same result as hardwiring your dash cam to your vehicle’s fuse panel. It supplies power to the dash cam even when the vehicle is parked, and the BlackVue monitors the power level to shut down if the voltage drops too low (you can adjust the cutoff level using the BlackVue App).

The main advantage of the OBD-II Power Cable is its convenience. Simply plug it in, and you’re all set. It’s likely the easiest solution for enabling Parking Mode.

Compatible with most BlackVue dash cams

All BlackVue dash cams that have a built-in voltage monitor are supported. In other words, the BOC-300 supports most models since the DR750X/DR900X Series. If your BlackVue dash cam came with a Hardwiring Power Cable (with yellow, red and ground wires), then it is compatible with the OBD II Power Cable.

Supported models:

DR970X Series
DR970X LTE Series
DR900X Plus Series
DR750X Plus Series (except LTE)
DR900X Series
DR750X Series (except LTE)

What's Included

1 x OBD-II Power Cable (BOC-300)

Specifications

Cable Length

3m / 9.84ft

DC Plug

Ø3.5 x Ø1.1mm

Input

OBD II

Max Output

3A / 12V (36W)

Weight

0.176 lb / 80 g

Warranty

1 year warranty

Resources

Super easy install, Provides 24hr protection with no wiring hassle

I was having a hard time trying to find a place to connect the always on line for parking mode. I also didn't like having my dash cam plugged into the power plug on the dash of my truck. This cable solved but problems. All I had to do was plug it in and tuck the single wire in around the trim. PERFECT.

Thanks for sharing your experience, Steven! We’re glad the OBD-II cable made your installation simple and gave you hassle-free 24-hour parking protection.

Cable review

Cable was easy to install the car and camera. So far dissatisfied overall, the camera will not connect to the cars WiFi to have a cloud connection.

Did not fit my camera even though it was supposed to

I received the cord but the end that goes into the camera did not fit so now I'm stuck waith one that doesn't work. I was able to get the old cord to work but now my camera turns off and back on every minute. It has never done this before.

ODB II Cable

Makes wiring a breeze and very quick. Great product and superb support from BBMC! Highly recommend product and BBMC for all dashcam needs. The only place I would purchase from!

Works with DR770X no problems

Works with Blackvue DR770X in my 2016 Mazda MX-5. I appreciate the small size of OBD2 adapter that doesn't stick down from the port. The cable is more than long enough especially for the small car. My only complaint is that I wish the resistors(?) that are in-line on the cable were smaller. It is difficult to hide that portion of the cable because of the bulkiness there.

1 2