Skip to content

What Is an IROAD OBD Cable?

IM-300 compatibility, switches and parking power

How does it work?

An OBD power cable can save you from connecting a dash cam directly to the fuse box. It plugs into the vehicle's OBD-II diagnostic port and supplies power to a compatible camera. Parking recording still draws energy from the vehicle, so choosing the right cable is part of protecting both your camera setup and the vehicle battery.

This guide focuses on the IROAD IM-300, which has separate vehicle and recording selectors. The illustration beside this section shows earlier IROAD hardware, not the IM-300. Use the IM-300 instructions below when checking the current cable.

Our OBD installation guide explains the general connection. If OBD power does not suit your vehicle, compare a supported hardwire installation before choosing another cable.

The linked OBD installation guide gives different hybrid selector guidance from IROAD's current IM-300 page. Before setting the switch, verify your exact vehicle against the current manufacturer guidance and ask us to confirm the setting.

Earlier IROAD cable illustration, shown for context rather than IM-300 setup
Earlier IROAD illustration, not the IM-300. Select the image for the full view.

Finding the OBD-II port

Look for the OBD-II port in your vehicle manual. It is often under the dashboard near the steering wheel, but access and accessory restrictions vary. The photograph illustrates the port with a diagnostic connector; that connector is not the IROAD power cable.

Earlier IROAD installation video

This earlier IROAD video is included for general installation context. For IM-300 setup, follow the current IM-300 quick-start manual and the F/EV and S/P guidance in this article. Confirm the setting for your exact vehicle before connecting.

Set the IM-300 switches

The IM-300 has two selectors with different jobs. Check both before connecting it to the vehicle.

S/P: driving and parking power

The recording selector uses S for driving only and P for driving and parking power. P supplies parked power; the camera still needs the correct parking settings and a supported connection to record as intended.

F/EV: vehicle type

The other selector is marked F/EV. IROAD labels F for fuel vehicles and EV for hybrid/electric vehicles on its IM-300 page. Check your exact hybrid against the current compatibility guidance before connecting. A switch position that works in one vehicle does not establish fit for every hybrid.

Check the vehicle and camera first

Check the vehicle model and year, the IM-300 and the camera's power connector together. A matching port shape alone does not establish compatibility. The current BlackboxMyCar compatibility guide includes tested vehicle exceptions and camera limits.

IROAD's IM-300 quick-start manual specifies IROAD cameras. BlackboxMyCar also supports compatible Thinkware and FineVu connections, but some older models use different connectors. Confirm that pairing with our team; the manufacturer's manual does not establish cross-brand compatibility.

If you're considering a 24V vehicle, check the camera's voltage rating as well as the port. The IM-300 supports 12V to 24V input and output. It does not convert 24V to 12V. Follow the vehicle manufacturer's accessory guidance before using its diagnostic port.

Will it drain my vehicle battery?

Parking recording uses power after you switch the vehicle off. The IM-300 includes low-voltage and overcurrent protection, but those protections do not establish a fixed recording time or guarantee that a vehicle battery will never discharge. Battery condition, charge, camera load and settings all affect parked operation.

Set the camera's parking timer and battery protection according to its own instructions. For supported IROAD cameras, the IROAD Android app includes low-voltage cut-off settings; available controls depend on the camera.

If you often leave the vehicle parked for long periods, compare a compatible dedicated battery setup. Our battery installation guide explains that separate option. The charging input and camera output still need to suit your equipment.

Our explanation of parking-mode recording covers what the camera can capture while the vehicle is parked.

Set it up and test it

Complete the compatibility checks before installation, and make the connections while parked. Do not use a damaged or modified cable. Follow the IM-300 quick-start manual for setup.

  1. Locate the port and choose the vehicle and recording settings specified for your cable.
  2. Connect the cable to the supported camera. Secure the routing clear of pedals, steering components, airbags and moving trim.
  3. With the vehicle on, confirm that the camera saves a driving recording.
  4. Park safely, let the camera enter its intended parking mode, and review a saved parking clip. Follow the camera's timing instructions rather than assuming every setup changes modes immediately.

If the camera stays in the wrong mode, loses power unexpectedly or the vehicle shows a warning, stop using the setup and have the connection checked. Tell support the vehicle and camera models, cable version, both selector positions and what happened during each test.

Frequently asked questions

Does an IROAD OBD cable fit every car?

No. Check the exact vehicle and camera against the current compatibility guidance. Some vehicles and older camera connectors need a separate decision even when an OBD-II port is present.

Does P mode also power the camera while driving?

Yes. IROAD describes P as driving and parking power. The camera still needs a supported connection and its own recording settings.

Which setting should I use for a hybrid?

IROAD groups hybrids with electric vehicles on its IM-300 page, but confirm the setting for your exact vehicle before connecting. Check the current compatibility guidance and ask our team if the instructions differ.

Can I unplug it for a diagnostic scan?

The cable occupies the OBD-II port. Follow the technician's instructions when they need access. Reconnect and test the dash cam afterwards.

How long will parking mode run?

There is no fixed duration for every installation. The available battery charge, vehicle behavior, camera load and protection settings affect when recording stops.

Need help choosing the right cable?

Send us your vehicle's make, model and year, your dash cam model, and whether you already own an IM-300 or are choosing one. We'll help you check the pairing before you connect it.

View the IROAD IM-300 cable

Contact BlackboxMyCar

Browse our current dash-cam range if you are choosing a camera as well as its power cable. Ask us to confirm the camera and cable pairing.