Designed to Be Your One-Stop Shop For New Dash Cam Enthusiasts
Dash Cam Mounting and Removal Guide
How to Mount & Remove Your Dash Cam
Although dash cams are made to be as straightforward as possible to use, there are ways to mount them into the car in order to receive the most optimal video recording quality and protection. Some questions we receive frequently include where to position the dash cam on the windshield, if a dash cam will interfere with the vehicle’s sensors and what kind of surfaces the dash cam can be attached to.
If you have any further questions for our product experts, please don't hesitate to contact us. We're here to help.
Mounting Your Dash Cam
Where to Mount Your Dash Cam
Although all dash cams have wide angle lenses so that they maximize the field of view, they should be mounted in or near the middle of the front windshield so that an even field of view for the sides of the vehicle is recorded. This is also because the dash cam lens rarely can be adjusted horizontally but almost always can be adjusted vertically. We recommend you mount the dash cam near the rearview mirror area so that this block some parts or all of the dash cam from the driver’s field of view, minimizing any distractions.
We always recommend to angle the lens slightly upwards so that video footage displays about 60% sky and 40% road. This angle offers a good balance of exposure and details. For dash cams that have a wi-fi / smartphone app, we recommend you view live footage from your phone while mounting the dash cam so you can select what position and angle you prefer the dash cam to be set at.
Mount your dash cam near the middle of the front windshield so that an even field of view for the sides of the vehicle is recorded.
While many new vehicles offer sensor technology (like the Subaru EyeSight) for rain detection and ADAS, dash cams will not interfere with these sensors as they are mounted against your windshield and points outwards.
No Sensor Interference
Many new vehicles have complicated sensors near the stem of the rearview mirror, responsible for things such as rain detection, advanced drivers-assistance system, etc. One specific question we get all the time is if a dash cam will interfere with these sensors, especially for the Subaru Eyesight.
The answer is no, as these dash cams simply aren’t in the way of these sensors that are mounted directly against the windshield and pointed outwards. Even if this is still a concern, simply move the dash cam to another area on the windshield and everything will work just as fine.
Dash Cam Mounts & Tapes
When putting on an adhesive mount, which almost all dash cams use, the windshield should be thoroughly cleaned with a window cleaner. Ensure the area is wiped dry and at room temperature (not too cold and definitely not under direct sunlight) before applying the adhesive.
Once complete, press your hands against the mount and add pressure for about 10 seconds to secure the adhesive against the glass. This ensures the adhesive is properly bonded to the windshield and remains secure against vibrations. The same instructions apply for dash cams that use suction cup mounts. The adhesives for these mounts, as well as for suction cups, work the best only on glass surfaces. Mounting onto other materials in the vehicle such as plastic, leather or alcantara will likely result in a weak and insecure hold.
When applying your adhesive tape, ensure the area is wiped dry and at room temperature (not too cold and definitely not under direct sunlight) before applying.
Removing Your Dash Cam
Use a Prying Tool & Blowdryer
Removing a dash cam is often trickier than mounting it on the windshield. This is because the adhesive on the mount is very strong and can almost be impossible to remove with just your fingers.
We recommend using a prying tool (one may have been included with your dash cam) to slowly loosen the adhesive.
The best method, however, is to use a blowdryer. Aim the blowdryer from the outside of the vehicle (inside is ok as well) against the adhesive. Just 5 to 10 seconds should do, then slowly wiggle the mount back and forth - the adhesive should be a lot looser since the glue is heated up and softened. Feel free to use a prying tool here or the blowdryer again if the heat isn’t sufficient the first time.
Find Your Next Dash Cam
Explore Our eLearning Guides
Dash Cam Buyer's Guide
New to dash cams? Try out our dash cam buyer's guide to start your journey.
Dash Cam Accessories
Want more out of your dash cam? Find an accessory that's right for you.
Our Best Dash Cams
Make great purchasing decisions with the right dash cam for you.
Let us show you how to install your own dash cam & accessories.
Got More Questions?
Not to fret, our in-house product experts are here to help. We have spent years curating helpful content and video guides, helping customers with their dash cams, but we understand that we can always do better. Contact us using the form below and we'll get back to you as soon as we can. We love what we do, because we're here to help you make the most informed purchasing decision.