Cellink Replacement Power Cable

by EGEN

$24.99 USD
Choose Option
Shop in CAD

Overview

Cellink Replacement Power Cable

  • 12V Cigarette Charging Cable (1.5m / 5') for 5A charging with a cigarette socket in the vehicle. There are two variants available. One for the original Cellink B, and the other for the newly released Cellink NEO
  • ACC Hardwire Charging Cable (3m / 10') for 7A charging when tapped into fuse box (add-a-fuse recommended)
  • Power Output Cable with Cigarette Socket (9cm / 3.5 inches). Can be cut for use with direct hardwire dashcams as well
  • Power Output Cable unspliced (1.5m / 5 feet) (three wires - ACC/Battery/GND)
  • Power Output Cable with spliced hardwire cable (4.5m / 15 feet) (for Thinkware, BlackSys, and other direct hardwire dash cams)

*The Power Output Cable has 3 wires coming out of it which can be used if your dashcam doesn't allow parking mode unless a hardwire kit is used. The colour coding is as follows: Yellow = Battery/Constant, Red = ACC/Ignition Switched, Black = Ground. Read more here.

FAQ

What is Parking Mode?

Parking mode is offered on most of the dash cams available at BlackboxMyCar. While it is important to protect your vehicle while driving, it is just as important to have your vehicle protected while it is parked. When the dash cam is in parking mode, footage will only be saved when there is an impact and/or motion. Parking mode can be enabled with a hardwiring kit or a battery pack.

For more information on parking mode, click here.

What is a Hardwire Kit?

A hardwiring kit enables parking mode. It allows your dash cam to remain powered on even when the vehicle's ignition is turned off. Installation is a breeze as you will only need to find an accessory fuse, constant fuse, and a grounding point.

What is a Battery Pack?

Most customers purchase the battery pack to avoid using the vehicle’s battery to power their dash cam. The battery pack is charged by either being hardwired into an accessory fuse or by being plugged into one of the vehicle's 12-volt cigarette sockets. We recommend the hardwiring the battery pack as it charges the battery pack quicker.

For more information on Battery Packs, click here.

How much footage will my memory card store?

On average, a 2-channel dash cam writes 16GB/hour and a 1-channel dash cam writes about 8GB/hour.

Click here to see all the memory cards we carry.

Do I need a Rear Camera?

Accidents or events don't always happen at the front of the vehicle! Having a rear camera provides coverage for any events or accidents that may happen at the rear of the vehicle.

For more information on rear view cameras, click here.

Do I need a IR Rear Camera?

An IR camera is designed to record the interior of the vehicle in low light conditions. This option is very popular among rideshare drivers.

For more information on why rideshare drivers need dash cams, click here.

What is a CPL filter?

A CPL filter attaches to the dash cam lens to eliminate lens flares, light reflections, and windshield glares.

For more information on CPL filters, click here.