All Warehouse Deals items are new. The original packaging may be damaged from shipping/delivery to our warehouse. All sales are final.
Warehouse Deals Items
BlackVue Power Magic Pro
The Power Magic Pro hardwiring kit supplies constant power to your BlackVue dash cam from your vehicle’s battery according to the configured voltage and timer to prevent vehicle battery discharge. It is designed to cut off at different voltages or using the timer to protect your vehicle's battery. By installing your dash cam using a Hardwiring Kit, you will gain access to new vehicle features including parking mode. Additional features can be discovered through our Dash Cam Buyer's Guide.
To learn more about the Power Magic Pro, check out our Introduction Guide. For more detailed instructions on how to use the Power Magic Pro Hardwiring Kit, check out our Power Magic Pro Installation Guide, as well as our general Hardwiring Fusebox guide.
For all the tools you need to properly hardwire your dash cam into your vehicle, we would recommend purchasing the Essential BlackboxMyCar Install Package. Purchasing this Hardwiring Kit includes Add-a-Fuse Kits and Fuse Taps. For detailed information on how to use Add-a-Fuses, check out our Add-a-Fuse Setup Guide.
If you have any further questions, our product experts are here to help.
Our video resources below will give you a breakdown of how the Power Magic Pro works. If you are wondering what the difference between Hardwiring Kits vs installing with a Dash Cam Battery Pack is, check out our comparison chart.
For more YouTube videos on the BlackVue Power Magic Pro, click here.
- Power Magic Pro
- Double-Sided Tape
- Wire Harness
RATED OUTPUT VOLTAGE
12V - 24V DC
1A (Max 2A)
OUTPUT VOLTAGE CUT-OFF
12.0V or 12.5V (+/- 0.1V) | 22.8V - 23.2V (+/- 0.1V)
OUTPUT TIMER CUT-OFF
6 Hours - Infinity
COUNTRY OF ORIGIN
1-Year manufacturer Warranty
What is Parking Mode?
Parking mode is offered on most of the dash cams available at BlackboxMyCar. While it is important to protect your vehicle while driving, it is just as important to have your vehicle protected while it is parked. When the dash cam is in parking mode, footage will only be saved when there is an impact and/or motion. Parking mode can be enabled with a hardwiring kit or a battery pack.
For more information on parking mode, click here.
What is a Hardwire Kit?
A hardwiring kit enables parking mode. It allows your dash cam to remain powered on even when the vehicle's ignition is turned off. Installation is a breeze as you will only need to find an accessory fuse, constant fuse, and a grounding point.
What is a Battery Pack?
Most customers purchase the battery pack to avoid using the vehicle’s battery to power their dash cam. The battery pack is charged by either being hardwired into an accessory fuse or by being plugged into one of the vehicle's 12-volt cigarette sockets. We recommend the hardwiring the battery pack as it charges the battery pack quicker.
For more information on Battery Packs, click here.
How much footage will my memory card store?
On average, a 2-channel dash cam writes 16GB/hour and a 1-channel dash cam writes about 8GB/hour.
Click here to see all the memory cards we carry.
Do I need a Rear Camera?
Accidents or events don't always happen at the front of the vehicle! Having a rear camera provides coverage for any events or accidents that may happen at the rear of the vehicle.
For more information on rear view cameras, click here.
Do I need a IR Rear Camera?
An IR camera is designed to record the interior of the vehicle in low light conditions. This option is very popular among rideshare drivers.
For more information on why rideshare drivers need dash cams, click here.
What is a CPL filter?
A CPL filter attaches to the dash cam lens to eliminate lens flares, light reflections, and windshield glares.
For more information on CPL filters, click here.