BlackVue OBD-II-Stromkabel

Does not work shut off while driving leaving me with no power to my camera and when I turn off the engine it shuts down the camera within seconds meaning no parking mode

It didnt work

Very good with Buick Regal Basic 2016y.
Excellent cable.

Did not work in a 2024 VW Taos. Would not enter in parking mode and drained the battery. Switched to the 3 wire kit and works fine now.

Easy to set up and works well

BlackVue OBD-II Power Cable is notcompatible with DR 750XLTEPLUS-E79764!

Amazing and simple to use.

Cord is a bit long, would be nice to have a shorter option for when you don’t need the extra, but tucking it away is simple. The product works flawlessly.

The cord diameter is small enough to hide and tuck behind trim or weatherstripping. Worth the price 10x with one parking lot mishap, a hit and run, or the like.

Works fine in my 2016 Lexus RX 350. Nice, clean and easy hook-up. BE AWARE, however, that when checking for compatibility with your vehicle, that after turning off the ignition, the vehicle may still provide power to the "switched" pin on the OBD-II port for a few minutes. I discovered that after experimenting and initially believing that the unit would not work properly with my vehicle.

I was having a hard time trying to find a place to connect the always on line for parking mode. I also didn't like having my dash cam plugged into the power plug on the dash of my truck. This cable solved but problems. All I had to do was plug it in and tuck the single wire in around the trim. PERFECT.

Cable was easy to install the car and camera. So far dissatisfied overall, the camera will not connect to the cars WiFi to have a cloud connection.

I received the cord but the end that goes into the camera did not fit so now I'm stuck waith one that doesn't work. I was able to get the old cord to work but now my camera turns off and back on every minute. It has never done this before.

Makes wiring a breeze and very quick. Great product and superb support from BBMC! Highly recommend product and BBMC for all dashcam needs. The only place I would purchase from!

Works with Blackvue DR770X in my 2016 Mazda MX-5. I appreciate the small size of OBD2 adapter that doesn't stick down from the port. The cable is more than long enough especially for the small car. My only complaint is that I wish the resistors(?) that are in-line on the cable were smaller. It is difficult to hide that portion of the cable because of the bulkiness there.

for parking mode if you don't want to hardwire the dashcam just plug into obd in your vehicle This time i took hardwires out and tried OBD2 works great on Grand cheroke

Used this to power my BlackVue Dash Camera. Also used a Obd2 splitter to keep access to port for diagnostics. Have done this in several vehicles with great success and easy removal if needed.

I had the old Power Magic EZ which did the job fine delivering constant power to my old Blackvue 750S on my 2015 FIAT 500e but it longer worked for the new FIAT. I bought this and took this opportunity to upgrade the dashcam to 970X. It did do the job fine but somehow FIAT decided that the OBD port is switched (cuts off after 5 minutes) instead of constant power.