Thinkware dash cams are fully compatible with IROAD OBD cables.
IROAD Power OBD-II
If your vehicle is a non-electric or hybrid vehicle (ie. non plug in vehicle that derives all or some of its power from a conventional gasoline engine), then please select the "Non-Electric/Hybrid" option.
If you drive a true electric vehicle (ie. it gets all of its power from electrical sources), then please select the "Electric" option.
IROAD Power OBD-II
The IROAD Power OBD-II cable can simply be plugged into the OBD terminal to enable parking recording with IROAD dash cams.
- Set Recording Mode (S: Driving Mode Only / P: Driving & Parking Mode)
- Overcurrent Cut-Off
- Supports Stop & Go Technology
- Compatible with Electric/Hybrid/Non-Electric vehicles
DC 12V-15V / Max 1.8A
2 Meters / 6.5 Feet
-40°C - 85°C / -40°F - 185°F
COUNTRY OF ORIGIN
What is Parking Mode?
Parking mode is offered on most of the dash cams available at BlackboxMyCar. While it is important to protect your vehicle while driving, it is just as important to have your vehicle protected while it is parked. When the dash cam is in parking mode, footage will only be saved when there is an impact and/or motion. Parking mode can be enabled with a hardwiring kit or a battery pack.
For more information on parking mode, click here.
What is a Hardwire Kit?
A hardwiring kit enables parking mode. It allows your dash cam to remain powered on even when the vehicle's ignition is turned off. Installation is a breeze as you will only need to find an accessory fuse, constant fuse, and a grounding point.
What is a Battery Pack?
Most customers purchase the battery pack to avoid using the vehicle’s battery to power their dash cam. The battery pack is charged by either being hardwired into an accessory fuse or by being plugged into one of the vehicle's 12-volt cigarette sockets. We recommend the hardwiring the battery pack as it charges the battery pack quicker.
For more information on Battery Packs, click here.
How much footage will my memory card store?
On average, a 2-channel dash cam writes 16GB/hour and a 1-channel dash cam writes about 8GB/hour.
Click here to see all the memory cards we carry.
Do I need a Rear Camera?
Accidents or events don't always happen at the front of the vehicle! Having a rear camera provides coverage for any events or accidents that may happen at the rear of the vehicle.
For more information on rear view cameras, click here.
Do I need a IR Rear Camera?
An IR camera is designed to record the interior of the vehicle in low light conditions. This option is very popular among rideshare drivers.
For more information on why rideshare drivers need dash cams, click here.
What is a CPL filter?
A CPL filter attaches to the dash cam lens to eliminate lens flares, light reflections, and windshield glares.
For more information on CPL filters, click here.
Customer ReviewsWrite a review
I'm not an expert at wiring, and I was worried about the length of the cable. But everything worked perfectly with some to spare! My dash cam works flawlessly.
Delivery was very fast! Thank you!
All the fuses for my 2020 grand cherokee are in the engine compartment and therefore not very accessible, at least at my level of knowledge. TheOBDll cable provided an easy alternative that seems to be working fine (eg. I get both continuous and parking modes). I'm very happy with this solution, and the fact that the price has been reduced to $50.
After installation didn’t expect an explanation of the camera function. Made it easy to understand the features.