The OPIA1 is the premium WiFi dash cam from VicoVation offering excellent video quality. It achieves this by utilizing the Sony STARVIS sensor and Novatek chipset. With this model, you can connect your Android or iOS device to the camera to download and playback videos using the OPIAViewer application. VicoVation dash cams are not only known for their video quality but their build quality as well. The OPIA1 uses a supercapacitor design that can record at internal temperatures up to 70°C/158°F. The compact body, high heat endurance, and adhesive mount make it a decent option for parking mode if paired with a battery pack. Parking mode can be either triggered by motion detection or record in time lapse mode. It also comes with a suction cup for use in rental/temporary vehicles.
OPIA1 does not come with a quick release bracket which is needed to install the CPL filter accessory.
Check out our Review! For more information, see below for our video reviews, sample footage, and guides.
Sample Footage: Opia1
Sample Footage: Opia1
Comparison: Opia1 vs Opia2
For more YouTube videos on the Vicovation Opia1, click here.
- Front Camera
- Memory Card of Your Choice
- 12V Power Cable (4m / 13")
- Suction Cup Mount
- Adhesive Mount
- User Manual
- 90-Day Warranty
Full HD 1080p @ 60 FPS
-10°C - 70°C (14°F - 158°F)
MAXIMUM SD CARD
COUNTRY OF ORIGIN
What is Parking Mode?
Parking mode is offered on most of the dash cams available at BlackboxMyCar. While it is important to protect your vehicle while driving, it is just as important to have your vehicle protected while it is parked. When the dash cam is in parking mode, footage will only be saved when there is an impact and/or motion. Parking mode can be enabled with a hardwiring kit or a battery pack.
For more information on parking mode, click here.
What is a Hardwire Kit?
A hardwiring kit enables parking mode. It allows your dash cam to remain powered on even when the vehicle's ignition is turned off. Installation is a breeze as you will only need to find an accessory fuse, constant fuse, and a grounding point.
What is a Battery Pack?
Most customers purchase the battery pack to avoid using the vehicle’s battery to power their dash cam. The battery pack is charged by either being hardwired into an accessory fuse or by being plugged into one of the vehicle's 12-volt cigarette sockets. We recommend the hardwiring the battery pack as it charges the battery pack quicker.
For more information on Battery Packs, click here.
How much footage will my memory card store?
On average, a 2-channel dash cam writes 16GB/hour and a 1-channel dash cam writes about 8GB/hour.
Click here to see all the memory cards we carry.
Do I need a Rear Camera?
Accidents or events don't always happen at the front of the vehicle! Having a rear camera provides coverage for any events or accidents that may happen at the rear of the vehicle.
For more information on rear view cameras, click here.
Do I need a IR Rear Camera?
An IR camera is designed to record the interior of the vehicle in low light conditions. This option is very popular among rideshare drivers.
For more information on why rideshare drivers need dash cams, click here.
What is a CPL filter?
A CPL filter attaches to the dash cam lens to eliminate lens flares, light reflections, and windshield glares.
For more information on CPL filters, click here.