Looks like you're from . Would you like to shop in CAD? Yes, Shop in CAD

News

The Cellink NEO and its Functions

The Cellink NEO and its Functions

The Cellink Battery NEO is one of the best battery packs that we offer for supporting your dash cam and its parking mode functions. Most customers purchase the Cellink NEO Battery to avoid hardwiring or using the vehicle’s battery to power their dash cam. The Cellink Battery is able to charge itself by being hardwired into an ignition fuse in your car’s fuse box, or by being plugged into one of your car’s 12-volt cigarette sockets. A Cellink NEO Battery takes around 45-60 minutes to fully charge. When the NEO is fully charged, it will provide enough power to have your 2-Channel dash cam system run for about 20 hours of parking mode recording (*please note that the BlackVue DR900S-2CH will run for about 15~ hours). This is a substantial difference when compared to the 5-7 hours of parking mode recording that a typical hardwiring kit can offer.

Once your car is turned off, the dashcam will seamlessly run on the Cellink’s power. During this time, power from your vehicle’s own battery will not be used, which will help prolong your vehicle’s battery’s life and keep it in top condition.


What's New

The NEO is an all new dash cam battery pack with an integrated smartphone app that lets you quickly check the remaining battery life percentage as well as the current power draw. There’s no need to look at the battery once it’s installed, making this setup very easy to use! Powered by LiFePO4 (Lithium Iron Phosphate) this power pack is designed with vehicular dash cams in mind. Able to provide up to 45 hours of continuous power (for a 1-CH device) to your camera with a quick 45 minute charge, this battery is something you can rely on.

The NEO also features Bluetooth technology when paired with the apps that are available on the iOS App Stores as well as the Google Play Store. The app displays information such as overall remaining battery life, whether the unit is charging or discharging, expected battery life while powering the attached camera, and time remaining until fully charged. With these useful new features and extended battery life, we are able to confidently recommend the NEO as the ultimate solution for powering your dash cam.

Another difference is the hardwire mode now draws 9 amps instead of the older generation’s 7 amps. This higher draw is part of what allows the NEO to charge so quickly. The cigarette socket charging method stays the same at 5 amps.


We worked alongside EGEN to create a comprehensive english manual for the Cellink NEO's smartphone app. You can view it here!

For a comparison between the Cellink NEO and its predecessor, the Cellink B, click here! You can also take the battery home to charge from a regular power outlet using our power inverter.

Options to Consider

If you have the 12v male cigarette jack for your NEO, your charging options aren’t limited to just the car’s cigarette socket. With the male cigarette jack, you can charge your NEO via any regular power outlet through a power inverter, so long as the power inverter. has an output of 5A and also has a female cigarette socket. If you purchase a power inverter that outputs anything less than 5A, then the Cellink will not be able to charge. This is why it is very important to make sure that your power inverter can charge your Cellink if you plan to charge your Cellink at home. One thing to keep in mind when purchasing is how the Cellink will function in different climates. It’s important to note that all batteries will face some performance issues in very cold temperatures. Despite this setback, the Cellink Battery NEO and its aluminum housing is still very useful in colder climates. Using a Cellink will result in less overall strain on your car’s battery compared to straight hardwiring the dash cam, regardless of the temperature outside. When using the 12v cigarette adaptor, it is recommended that you keep the Cellink plugged in at all times, to keep the battery functioning at its best.

The Cellink Battery NEO also has an optional Expansion pack that can be attached to it. This Expansion pack acts as an extra battery and effectively doubles the amount of time that your Cellink can provide a charge for. This means that your Cellink Battery will keep your dashcam on for around 40 hours for a 2-Channel setup when paired with an Expansion pack instead of the 20 hours that we mentioned earlier.

Some customers run multiple dash cam systems in their car at once. In cases like this, we recommend getting a secondary Cellink NEO unit instead of getting the expansion pack. Using two separate units will charge much faster (to full) than using a Cellink + expansion pack. It is also safer to run two battery packs instead of one as the dash cams will have different sources for power. This means that if one Cellink fails, only one system will go down instead of both systems going down at once.

Verdict

If you are looking to avoid hardwiring, want to prolong your car’s battery, or are looking to extend the duration of your dash cam’s parking mode, then you will definitely want to pick up the Cellink NEO Battery.